全国咨询热线:13926264803

2019115星期二 44200

专心研究,精心制作,谋求高品质发展
Focus on researching,Elaborately making, seeking high quality development.
专心研究,精心制作
谋求高品质发展

印花设备专用油加热器

向你推荐
  • 宝贝详情
  • 印花设备专用油加热器

     

    >>机型特点   Main feature
        ●   
    最高使用温度300℃  Highest temperature reaching 300

           按键式操作面板,操作简单 The panel control adopted micro, easy operation

           采用连轴式热媒油泵浦,泵浦流量大,使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定选用德国KSB、德国SPECK、德国ALLWEILER热媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand

           自动排气和带手动模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油温度显示 temp. indication of oil output and return

           多段加热控制,功率可自行调整 multi-zone heating control with power self-adjusting function

           电气配电箱采用双重隔离及散热设计 Double-insulation/heating dissipation design for the electric distributioin cabinet
           减少废品率、减少加热时间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路系统设计,传热油不氧化,寿命长Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle。  

           采用高温保温材料隔热处理,节约能源及热量损失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss。

           故障指示,维修不用专业人员Fault indication function which allows maintenance without professional maintainers.


    >>安全保护系统 Safety system
      ●   
    总电源过电流无熔丝断路器 Circuit breaker     ●   异常警告指示灯系统 Alarm system
        
       马达反转保护及指示灯 motor rollback protective lamp     ●   异常警告蜂鸣器 Alarm sounding
        
       缺油保护及指示灯Oil lack protective lamp                     ●   保温隔热处理 Insulation heating system
           过热保护及指示灯 over-heat protective    ●   回油温度显示表Oil reture display
           循环泵浦过载保护及指示灯Circuiting pump overload protective lamp                            

       电源欠相保护 Power protection
           By-Pass油压回路 By-pass hydrauic circuit
    ;

    >>产品参数Specification

    机 型Model

    单位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    温控范围

    Control range

    60-300℃



    温控精度

    Control mode

    ±1



    电源power


    3φ 380V 50HZ 或其它(or other)



    传热媒体Heat transfer medium


    传热油heat tranfer oil



    冷却方式Cooling method


    间接冷却indirect cooling



    控制方式Control mode


    按键式操作面板 touching-tone   operation panel



    加热能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1.5

    2。2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦压力max. pump pressure

    KG/CM²

    2。2

    2.5

    3。2

    最大电力消耗max.power consumption

    KW/H

    37.55

    38.2

    29.2

    冷却水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循环油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2


    印花设备专用油加热器

     

    >>机型特点   Main feature
        ●   
    最高使用温度300℃  Highest temperature reaching 300

           按键式操作面板,操作简单 The panel control adopted micro, easy operation

           采用连轴式热媒油泵浦,泵浦流量大,使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定选用德国KSB、德国SPECK、德国ALLWEILER热媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand

           自动排气和带手动模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油温度显示 temp. indication of oil output and return

           多段加热控制,功率可自行调整 multi-zone heating control with power self-adjusting function

           电气配电箱采用双重隔离及散热设计 Double-insulation/heating dissipation design for the electric distributioin cabinet
           减少废品率、减少加热时间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路系统设计,传热油不氧化,寿命长Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.  

           采用高温保温材料隔热处理,节约能源及热量损失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.

           故障指示,维修不用专业人员Fault indication function which allows maintenance without professional maintainers.


    >>安全保护系统 Safety system
      ●   
    总电源过电流无熔丝断路器 Circuit breaker     ●   异常警告指示灯系统 Alarm system
        
       马达反转保护及指示灯 motor rollback protective lamp     ●   异常警告蜂鸣器 Alarm sounding
        
       缺油保护及指示灯Oil lack protective lamp                     ●   保温隔热处理 Insulation heating system
           过热保护及指示灯 over-heat protective    ●   回油温度显示表Oil reture display
           循环泵浦过载保护及指示灯Circuiting pump overload protective lamp                            

       电源欠相保护 Power protection
           By-Pass油压回路 By-pass hydrauic circuit
    ;

    >>产品参数Specification

    机 型Model

    单位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    温控范围

    Control range

    60-300℃



    温控精度

    Control mode

    ±1



    电源power


    3φ 380V 50HZ 或其它(or other)



    传热媒体Heat transfer medium


    传热油heat tranfer oil



    冷却方式Cooling method


    间接冷却indirect cooling



    控制方式Control mode


    按键式操作面板 touching-tone   operation panel



    加热能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1。5

    2。2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦压力max。 pump pressure

    KG/CM²

    2。2

    2.5

    3.2

    最大电力消耗max。power consumption

    KW/H

    37。55

    38。2

    29.2

    冷却水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循环油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2


湖南福彩网 辽宁福彩网 辽宁福彩网 江苏福彩网 江苏福彩网 湖南福彩网 江苏福彩网 西藏福彩网 江苏福彩网 上海福彩网